Die benötigten Scripte liefert Microsoft bereits bei der Installation mit. Sie befinden sich bei WindowsXP/2003 unter C:\windows\system32. Bei Vista wird man je nach Sprachversion unter C:\Windows\System32\Printing_Admin_Scripts\de-DE\ fündig. Die Parameter und Funktionen sind aber identisch.

Als Beispiel lege ich meinen neuen Homeofficesdrucker per Batchdatei an. Dieser ist per TCP/IP (TCP/9100) auf 192.168.178.6 erreichbar. Die Modellbezeichnung des Druckertyps kann von OS zu OS unterschiedlich sein. Man findet sie in der entsprechenden .inf Datei im Treiberverzeichnis unter [MODEL]. Weiterhin wird der Standort sowie Beschreibung gesetzt und im Netzwerk freigegeben.

Treiber hinzufügen:
cscript C:\windows\system32\prndrvr.vbs -a -m “Samsung CLX-216x Series” -v 3 -i “D:\temp\treiber\clx2160\GDI_COLOR\WINXP_2000
_VISTA_32\cx21s.inf”

TCP/IP-Druckerport:
cscript C:\windows\system32\prnport.vbs -a -r “IP_192.168.178.6″ -h 192.168.178.6 -o raw

Drucker hinzufügen:
cscript C:\windows\system32\prnmngr.vbs -a -p “SamsungPrinter” -m “Samsung CLX-216x Series” -r “IP_192.168.178.6″

Druckerbeschreibung ändern:
cscript C:\windows\system32\prncnfg.vbs -t -p SamsungPrinter -l “Neudietendorf” -m “Homeprinter”

Drucker freigeben:
cscript C:\windows\system32\prncnfg.vbs -t -p SamsungPrinter -h “SamsungShare” +shared -direct

alle Drucker und Treiber von Maschine entfernen:

REM spooler neu starten
net stop spooler
net start spooler

REM alle Drucker löschen:
cscript C:\windows\system32\prnmngr.vbs -x

REM alle Druckertreiber löschen:
cscript C:\windows\system32\prndrvr.vbs -x

mehr Infos:
Microsoft Technet

Wer trotzdem nicht auf den Luxus einer Paketverwaltung verzichten möchte greift zum DAG.

Einfach /etc/yum.conf um das Repository (hier CentOS4):

[dag]
name=dag
baseurl=http://apt.sw.be/redhat/el4/en/$basearch/dag
gpgcheck=0

erweitern und updaten.

Link zu FAQ

The process of setting up an VMware ESX3 Host ist quite similar to RHEL3/Centos3. I’m using Altriris Deployment Server (or HP Rapid Deployment Pack) but IMHO you could easily customize it for any other deployment solution.

The main steps are:
1. create a bootable dos partition with all necessary files for booting up the linux installer with loadlin – or linld.
2. create bootentries depending on your physical hardware (Proliant, PowerEdge Server…)
3. create a custom kickstart (ks.cfg) file which uses hostname and ip you entered in you deployment server console.
4. create virtual switches, portgroups etc. depending on your enviroment.
5. install further Managmentsoftware (e.g.: Openmanage, Proliant Support Pack), Backup- or Monitoringagents

Step One:
Deploy an empty FAT32 partition to you deploment client. Mine is 100MB, but it can be much smaller – you can use rdeploy. Reboot your maschine.
The install01.bat file attached is copying the needed files from deplomentserver share.

copy %OSFilesPath%\dosutils\loadlin.exe c:\loadlin.exe
copy %OSFilesPath%\dosutils\linld.com c:\linld.com
copy %OSFilesPATH%\dosutils\autoboot\initrd.img c:\initrd.img
copy %OSFilesPATH%\dosutils\autoboot\vmlinuz c:\vmlinuz

echo dos2unix.exe ks.cfg > C:\autoexec.bat


Step 2:
Now you have to create a custom bootentry for your linux loader. The main problem is that the ks.cfg will be located on hardware and the devicenames differ from vendor to vendor (e.g. /dev/cciss/c0d0 for HP with SmartArray – /dev/sda for MegaRaid). Be aware that the 9th generation of PowerEdge Server (PE1950, PE2950…) will not work with loadlin. Nobody really knows why, but I found it here.

install02.bat does make the decision for you what server hardware you’ve got:

if "%#!computer@right(prod_name,4)%" =="2850" goto sda
if "%#!computer@right(prod_name,4)%" =="2950" goto sdalld
if "%#!computer@right(prod_name,2)%" =="G4" goto cciss

:Exit
exit

The strange looking “%#!computer@right(prod_name,4)%” is Altiris DS specific. It’s reading out the vendor description for the Server presented at PXE Boot. This will differ to other Deployment solutions.
Now reboot you maschine and make C:\ drive bootable (install03.bat) and copy further files.

f:\bootwiz\dos\sys.com f:\bootwiz\dos c:
f:
copy f:\bootwiz\dos\himem.sys c:\
copy f:\bootwiz\dos\smartdrv.exe c:\
echo device=c:\himem.sys>>c:\config.sys
echo @echo on>>c:\autoexec.bat

Step3a: create ks.cfg file

The ks.cfg file is the answer file for the ESX Installer. If you are not familar with the kickstart procedure you can fancy it as an unattended.txt or winnt.sif file for Windows Installations. The main difference is that you also define package source (in my case a webserver with the hole cd copied to “http://webserverurl/esx3″ and partition scheme. The important section begins at %post and process self written scripts after the installation. I’m using it for creating virtual networks, installing the altiris (adl)agent and some small jobs.

You can easily create a ks.cfg file with installing ESX Server one time manually. The specified options are written to /root/anaconda-ks.cfg. For further information about kickstartfile consult VI Installation guide.

Step3b: Token Replacement Process
The Replacement Process is also Altris DS specific und uses for creating a machine specific kickstart file. It is replacing placeholders with the values you entered in Deployment Server Console. Because there is no Token for VMKernel network ip, I’m using the os license entry for it. Do not remove any “rem”ed line. – the Token Replacement will not work.

rem bootwork unload

rem replacetokens .\deplmes\deploy\pre-os\esx3\ks.cfg .\deplmes\deploy\pre-os\esx3\%ID%.cfg
Firm Copy F:\deplmes\deploy\pre-os\esx3\%ID%.cfg C:\ks.cfg
Firm Copy F:\deplmes\centos\unixdo16\dos2unix.exe C:\dos2unix.exe


After the Token Replacement process you installation is ready to be booted to production. This will start the installer with the ks.cfg file. Good luck!

You will find more information about step 4 and step 5 in the next Blog-entry “fully hardware-independent unattended ESX3 Server installation – Part 2″. This will be published in the next days.

Attachments:
install01.bat
install02.bat
install03.bat
Kickstart file ks.cfg